Zotac ZBox MA320 Plus Manuel d'utilisateur télécharger pdf (Page 16)

ZOTAC ZBOX

Using your ZOTAC ZBOX

Conguring wireless connection

To connect to a wireless network, follow the instructions below:

1. Double-click the crossed wireless network icon (pic) on

the notication area.

2. Select the wireless network you want to connect to

from the list and click Connect.

3. After connection was established, you will see

Connected.



For security concerns, Do NOT connect to an

unsecured network, otherwise, the transmitted

information without encryption might be visible to

others.



Enter the network security key if necessary.

Conguring wired connection

Using a static IP

1. Right-click the network icon on the

notication area and select Open

Network Connections.

2. Right-click Local Area Connection and

select Properties.

3. Highlight Internet protocol (TCP/IP) and

click Properties.

4. Select Use the following IP address.

5. Enter your IP address, subnet mask and

Default gateway.

6. If needed, enter the preferred DNS server address.

7. After entering all of the related values, click OK to nish the conguration.

Note: If you want to use USB charger for iPhone/iPad, please install the driver

at X:\Utility\Software\Usb Charger\setup.exe (X: your driver disk letter).



Each driver must be installed individually to ensure proper operation of the

ZOTAC ZBOX.

3. Select the driver you want to install. The driver installer should launch.

4. Follow the onscreen instructions to install the drivers.

5. Restart the system.

1 2 ... 11 12 13 14 15 16 17 18

Pas de commentaire

Zotac ZBox MA320 Plus Manuel d'utilisateur Page 16