Zotac AD12 Manuel d'utilisateur

9 ZOTAC ZBOX nano3. Press <Enter> to display the Onboard Device Control and navigate to Backlight Control. 4. Press <Enter> and

10 ZOTAC ZBOX nanoHow to enable USB2.0 charge (for S3/S4 status)1. In Advanced menu, select Onboard Device Cong and press <Enter>. 2. Use

11 ZOTAC ZBOX nano2. Enter CIR Controller and select Disabled. Enabled: enable the internal IR receiver (default)Disabled: disable the internal

12 ZOTAC ZBOX nanoCustomizing the ZOTAC ZBOX nano Please follow the instructions below to remove the cover of the ZOTAC ZBOX nano before customizin

13 ZOTAC ZBOX nanoInstalling a memory module1. Locate the SO-DIMM memory slot and insert a SO-DIMM memory module into the slot at a 45 degr

14 ZOTAC ZBOX nano2. Install the hard disk bracket to a 2.5-inch SATA hard disk with 2 screws.3. Insert the hard disk into the socket and gently sl

15 ZOTAC ZBOX nano4. Reinstall the screws of the hard disk bracket.Connecting a SPDIF cable 1. Connect the SPDIF cable to the headphone/SPDIF a

16 ZOTAC ZBOX nanoSetting up the ZOTAC ZBOX nanoPlease connect the peripherals before using the ZOTAC ZBOX nano.1. Connecting a DisplayPort display

17 ZOTAC ZBOX nano5. Turning on the systemConnect the supplied AC adapter to the DC IN jack on the system rear panel and then press the power sw

18 ZOTAC ZBOX nanoPositioning the ZOTAC ZBOX nano• Do not cover or block the ventilation holes on ZOTAC ZBOX nano. To ensure proper o

1 ZOTAC ZBOX nanoZOTAC ZBOX nano User’s ManualNo part of this manual, including the products and software described in it, may be reproduced, t

19 ZOTAC ZBOX nano3. Connect the ZOTAC ZBOX nano to your LCD monitor with an HDMI/DP cable.IR receiverExternal USB IR receiver 2. External US

20 ZOTAC ZBOX nanoRemote control (optional)ZOTAC ZBOX nano is shipped with a remote control. Follow the instructions below to use the remote contr

21 ZOTAC ZBOX nanoLithium cell installation1. Locate the arrow on the rear cover of the remote control, and push the cover as the arrow

22 ZOTAC ZBOX nanoInstalling drivers and softwareInstalling an operating systemThe ZOTAC ZBOX nano does not ship with an operating system preinstal

23 ZOTAC ZBOX nanoUsing your ZOTAC ZBOX nanoConguring wireless connectionPlease follow the instructions below to connect to a wireless network:

24 ZOTAC ZBOX nano291-MA261-02Using a dynamic IP (PPPoE connection)1. Repeat Step 1-3 in the previous section.2. Select Obtain an IP address auto

2 ZOTAC ZBOX nanoTable of ContentsProduct specications -------------------------------------------------------------------------- 3Safety informat

3 ZOTAC ZBOX nanoProduct specicationsChipset• AMD Hudson M3LProduct Dimensions • 127mm x 127mm x 45mmOnboard CPU • AMD E2-1800 Onboard graphic

4 ZOTAC ZBOX nanoSafety informationYour ZOTAC ZBOX is designed and tested to meet the latest standards of safety for infor-mation technology equipm

5 ZOTAC ZBOX nanoWelcomeCongratulations on your purchase of the ZOTAC ZBOX nano mini-PC. The following illustration displays the package content

6 ZOTAC ZBOX nanoGetting to know your ZOTAC ZBOX nanoFront viewRefer to the diagram below to identify the components on this side of the system1. P

7 ZOTAC ZBOX nanoRear viewRefer to the diagram below to identify the components on this side of the system.1. Power input (DC19V)The supplied po

8 ZOTAC ZBOX nanoHow to disable the ring LED indicator1. Turn on the ZBOX nano mini-PC, then press <Delete> to enter the BIOS SETUP UTILITY.